Sale!

Wurth RTV Silicon Sealer Wurth

£ 18,00

SKU: mode_4050822955121 Category: Uncategorized Tags: Black Friday 23, Category_Engine Parts

Description
shopping

Wurth RTV Sealant

Professional grade sealant for engine sumps etc

Instructions

Optimum adhesion to dry, clean and dust-free surfaces. The old sealant must be removed in full from the surface.

Excellent resistance to chemicals

Can also be used in critical areas in which the seal comes into contact with various liquids
Outstanding resistance to engine oil and transmission oil, refrigerant and anti-freeze agent

Non-acidic hardening system

Non-corrosive, therefore has no negative impact on electronic components and on lambda probes

Sealant in compressed-air can

Easy to dispense without additional aids
The fine beads allow the product to be applied uniformly

Notice

When sealing e.g. oil pans and gearboxes it is vital that no sealant gets into the interior. For this reason we recommend to apply the sealant on a joining part surface. Join both parts and then carefully press by hand and lightly slide against each other. Afterwards separate the parts again and then remove the sealant that has gone inside. Join the components again within a max. of 5 minutes and tighten firmly. Before commissioning, observe the hardening time (depending on the sealant thickness).

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Technical information

Colour	Black
Contents	200 ml
Chemical basis	Neutral crosslinked silicones, oxime-based
Smell/fragrance	Characteristic
Min./max. temperature resistance	-60 to 260 °C
Max. short-term temperature resistance	300 °C
Range of applications	Water pumps Oil pumps Front cover Camshaft bearing cover Thermostat housing Oil pans Transmission cover Sunroof Doors
Density	1.25 g/cm³
Min. skin-formation time	5 min
Conditions for skin-formation time	at 23°C and 50% relative humidity
Full curing speed	3 mm/d
Fully hardening/curing conditions	23°C and 50% relative humidity
Shore A hardness	30
Min. tensile strength	2.2 N/mm²
Conditions for tensile strength	in accordance with ASTM D-412
Max. breaking elongation/conditions	550 % / in accordance with DIN 53504
Heat conductance λ	0.2 J/(msK)
Heat conductance λ conditions	in accordance with ASTM D-2214/70
Coefficient of thermal expansion	0.0002 1/K
Coefficient of thermal expansion conditions	in accordance with ASTM EB-31
Dielectric strength	16 kV/mm
Dielectric strength conditions	in accordance with ASTM D-149
Relative permittivity	2.8
Conditions for relative permittivity	1 MHz, ASTM D-150
Loss factor	0.002
Loss factor conditions	1 MHz, ASTM D-150
Specific volume resistivity	1000000000000000 Ohm/cm
Conditions for specific volume resistivity	in accordance with ASTM D-257

Fast Shipping with Professional Packaging

Our long-standing relationships with UPS FedEx DHL and other global carriers gives us the ability to provide various shipping options. Our warehouse staff is highly trained to package your goods exactly according to the specifications we offer. Prior to shipping, your goods are thoroughly inspected and safely secured. Every day, we send thousands of packages to clients from all over the world. This is a sign of our commitment to be the largest online retailer globally. We have distribution centers as well as warehouses located in Europe as well as the USA.

Note that orders containing multiple items are processed according to the particular item.

Before shipping, all ordered products will be thoroughly inspected. The majority of orders today are shipped in 48 hours. It is expected that delivery will take between 3 and 7 days.

Returns

The stock is constantly changing. It's not completely managed by us, as we have multiple organizations, such as the factory and our storage. The actual stock can be changed at any time. It is possible that your order is out of stock when the order has been placed.

Our policy runs for 30 days. If it's been longer than 30 days since the date you purchased your item and we're unable to offer you a complete exchange or refund.

The item must not be in use and must be in the original packaging. You must have the item in the original packaging.

Wurth RTV Silicon Sealer Wurth

Related products

Login