Fuel Injector Set – 750cc – with Adapter Harnesses – Ecutek – GT86 & BRZ Ecutek

Ecutek High Capacity Port Injector Set for GT86 & BRZ

750cc

A complete set of 4 port injectors with adapter harnesses and new lower manifold seals.

The BRZ/FRS engine has both port and direct Injectors fitted, testing has shown the standard fuel delivery capacity is around 300bhp.

Larger Port Injectors will be required for any forced induction vehicle running over 300bhp on regular petrol, they will also be required on any forced induction vehicle running on Ethanol (like E85) regardless of the power output (where 30%+ more fuel volume is required compared to regular petrol).

We have extensively tested these Bosch Motorsport injectors on our own in-house forced induction GT86 and we developed accurate injector calibration settings that are supplied with each kit.

The larger port injectors will supply enough fuel for 500+ bhp on regular petrol.

These injectors are a perfect fit, with the injection nozzle protruding into the inlet manifold in exactly the same position as the standard injectors. Other aftermarket injectors either impede airflow by protruding too far into the intake, or spray fuel onto the inlet manifold walls, resulting in poor fuel droplet atomisation.

Due to their position and design, these injectors produce significantly better fuel atomisation than any other currently available high flow injector, providing you with better fuel consumption, more efficient combustion, and excellent distribution at low opening times, this eliminates the usual problems at idle and slow running conditions.